Crest Audio CDVS-4200 Series Instrukcje Operacyjne Pobierz pdf (Strona 49)

7-13

Device (Alarm)

e system allows for alarming by sensor, motion, video loss, and system displays such as temperature

indicator and hard disk usage. e Embedded DVR provides for alarm inputs (sensors) and relay outputs

(relays). e 4216H has 16 sensors and 4 relays, the 4216L has 16 sensors and 1 relay, 4208 channel has 8

sensors and 1 relay, and the 4 channel provides 4 sensors and 1 relay. e system can be set up to detect mo-

tion and create an alarm event. It can also activate a relay associated with a particular camera. e embedded

DVR can also detect video signal loss and create an alarm event. e system also has the ability to display on

screen if the temperature inside the DVR becomes too hot. e system also can be set to let the user know

when the disk capacity is nearing full. Each of these functions will be covered in the following pages.

Device (Alarm) Sensor

To set up and enable the sensors, click the Alarm button on the main Device Menu. e Device (alarm)

screen appears (see image below). To set up a sensor, click the sensor (icon will turn gold) and click the En-

able check box. Set the type of contact closure (normally open or normally closed) by using the up and down

arrows. Next, set the camera port, if any, to be associated with the sensor. ird set the relay if any you want

to activate when the sensor is activated. Lastly, set the dwell time in seconds for the alarm. If there are any

more alarms you want to set up, highlight by clicking the appropriate sensor and repeat the steps above. If

you want multiple sensors to have the same settings right click with the mouse, use the remote controller or

front panel to select the sensors (will turn gold) and click manual. All settings will be the same for the select-

ed sensors. Use the all button to set all sensors like the selected sensor. Please note that the camera and re-

lay port associated with all cameras will be changed to the camera port and relay port of the selected port.

Copy selected sensor setup to all sensors.

Make changes

to all selected

sensors.

Enable sensor.

Sensor type

N/O, N/C

Linked camera

Linked relay

Sensor dwell

time

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 80 81

Brak uwag

Crest Audio CDVS-4200 Series Instrukcje Operacyjne Strona 49